Brand New Industrial Plus 4' x 8' CNC Router Table :
4' X 8' active routing area / Rack & Pinion x, y axis with Gearbox / Ball screw 6” Z axis Gantry / AC SERVO Controller / HSD 5HP Spindle with 3Phase VFD / Vacuum Hold Down Ready & clamp down Platen / Vacuum Take Off Shroud / monitor & mouse / router bit and collet / 2,800 Lbs / 1 year warranty...$23,000.00 USD
Also, same AC Servo unit with HSD 5HP 3Phase Automatic Tool Changer with 6 Tool Station...$28,500.00 USD
New 4'x8' STEPPER Series CNC Router Table :
Rack and Pinion Drive XY axis & ball screw drive Z axis, Advanced micro-stepper motors & STEPPER Controller, Standard 6" Z Axis Gantry travel, T-Slot Platen, 5HP Spindle with 3Phase Inverter, 1 collet & 1 router bit, surface sensor, 1800lbs, 1 year factory warranty....$16,500.00 USD
Same units above in 5'x10', add $1,000.00 USD.
Sierra 4'x8' - Moving Platen with Fixed Gantry - CNC Router Table :
Moving Platen with Fixed Gantry, 4'x8' routing area, 6" Z, Ball Screw 3 axis X=40mm Y=25mm Z=20mm screws, AC Servo Controller, HSD 10HP 3Phase 6 tool AutoTool Changer assembly, 3000lbs, Demo Table built in 2009, full 1 year factory warranty, 10HP 3Phase 25"Hg OEM vacuum pump assembly with Starter...$45,000.00 USD
No Vacuum Pump, deduct -$3,200.00 usd
Best,
Robert
P: 604 513 0400
E : rcodd3@shaw.ca
Did you enjoy this article? Click here to subscribe to the magazine.